Scroll To Top
  • Remove Compare
  • Remove Compare
  • Remove Compare
  • Remove Compare
Clear All

More Than You Bargained For

All LED luminaires are not created equal. If you’re not careful, you could fall victim to the potential downfalls that come with luminaires produced by second-rate manufacturers. And the results could be disastrous. Poor lighting can lead to a whole host of issues:

Decreased productivity
Safety concerns
Wasted energy
Occupant discomfort

And that’s just the beginning! A cheap invoice price can really be quite costly in the long run.

Left in the Dark

When it comes to lighting, quality matters. Unreliable products can experience:

Left in the Dark icons

The-Silence-is-Deafening-image

The Silence is Deafening

When something goes wrong, will those second-rate manufacturers stand-up to the standards of their too good to be true warranties? Will they even be there to answer the phone?

    Outdoor

    Inferior Optics
    Most low-quality products do not provide adequate light distribution, resulting in dark areas that may increase the risk of an accident.

    No Replacement Parts
    Many low-quality products use “no name” brand drivers and other integral components. Replacement parts are typically unavailable, making these fixtures non-serviceable.

    Insufficient Surge Protection
    Most low-quality outdoor products do not have separate and replaceable surge protection devices.

    Light Trespass Issues
    Most low-quality products have poor back-light and up light control, resulting in light trespass and light pollution problems.

    High Bays

    Little to No Surge Protection
    Power quality in industrial environments can create issues for LED fixtures, especially products that do not offer any surge protection at all. Make sure high bays have a standard 6-10kV surge protection and meet or exceed ANSl requirement for industrial environments.

    Questionable Temperature Performance
    If you are buying a low-quality LED fixture, the reported operating temperature on the spec sheet may not match the label. Driver life and LEDs can be greatly impacted if used in temperatures above the actual fixture rating. Double check that the labels and spec sheets match.

    Non-Serviceable Drivers
    Many low-quality fixtures (especially round “UFO fixtures”) feature drivers absent of any surge protection which can’t be serviced or replaced. Don’t purchase a throw-away luminaire. Ensure drivers offer surge protection and are serviceable should the need arise.

    Inadequate Optics
    Exposed LEDs and clear lenses create hot spots, high-glare, and poor uniformity. Look for diffuse lenses that deliver uniform illumination and reduce glare with options that also create up-light.

    Panels

    Cheap Materials
    Panels fabricated from cheap materials, like polystyrene, can quickly become yellowed which results in inconsistent and unsatisfactory luminance.

    Subpar Manufacturing Process
    Many panel manufacturers do not assemble fixtures in a cleanroom environment which may allow contaminants. Uncontrolled manufacturing processes can result in inconsistent illumination across the panel, hot spots, and visual defects.

    Color Inconsistency
    The human eye can visually detect color variation of 5 or more Macadam ellipses in LED binning. Many low-quality flat panels allow a 7-step Macadam ellipse variation, resulting in visually apparent color inconsistency.

    Strips

    Non-Certified Drivers
    Drivers that aren’t externally certified are non-replaceable. Make sure the drivers are individually listed with UL so that they can be replaced if needed.

    Lack of Surge Protection
    Power surges can be detrimental to unprotected LED fixtures and surge protection is the first line of defense. Ensure product offers 2.5kv Surge Protection tested per ANSI Standards.

    Acrylic Lenses
    Acrylic material is more susceptible to damage and chemical deterioration when compared to polycarbonate. Look for polycarbonate lenses to withstand harsher environments and offer shatter-resistance.

    Cumbersome Installation
    Screwdrivers and/or pliers are often required to open and install strips. Tool-less access allows for a simpler and faster installation and service in the field.

    Edgelit Downlights

    Color Inconsistency
    Many import edgelit downlights allow a 7-step standard deviation (Macadam ellipse) variations, resulting in visually apparent color inconsistencies from fixture to fixture.

    Field Wiring Limitations
    Small wiring compartments are not optimized for wiring multiple fixtures on the same circuit or routing wires in and out of the wiring compartment. This could result in potential code violations.

    Second-Rate Manufacturing Process
    Many edgelit downlighting manufactures do not assemble fixtures in a clean room environment. Uncontrolled manufacturing processes often result in visual defects.

    Poor Lumen Maintenance
    Many fixtures will provide a lumen maintenance number, but not back up how it was calculated, or at what temperature. Most are published at 25⁰C, but performance can be much lower at higher ambient temperatures in the real world.

    Heed the Warnings

    Lithonia Lighting logo

    Minimize your enterprise risk and choose the go-to brand of professionals for over 70 years. Lithonia Lighting offers the Best Value in Lighting® with the industry’s broadest line of commercial, industrial, institutional and residential luminaires. With hundreds of SKUs included in the Contractor Select program and thousands available for LightQuick® delivery, you can rest assured you will have the right products, readily available with the trusted performance you need.

    When you’re looking for quality, reliability and solid performance – look towards Lithonia Lighting.

    Product Offering